Skip to content

Home  |   About Us  |   Investors  |   Careers  |   News & Media  |   Customer Support

Doosan Engineering & Construction

Manufacturing Shop

Changwon Plant 1
Changwon Plant 1
Changwon Plant 1
Plant Area Site : 198,000 ㎡
Shop : 30,750 ㎡ (2 Bays)
Production Capa. 3,000Ton (Jack Up Lifter)
36,000Ton/Year (Jack Up Lifter)
Max. Handling Capa. 4,500Ton (Jack Up Lifter)
Max. Trans. Capa. 30m(W) × 100m(L) × 1,000/
4,500 Ton
Max. Plate Bending Size 270(T)_Cold / 300(T)_Hot × 4m(W)
Max. Forming Capa. 270(T)_Cold / 350(T)_Hot
Max. Machining Size 4m(D) × 400mm(T)
Furnace Size 12m(W) × 13m(H) × 28m(L)
Shot Blast, Painting 20m(W) × 14m(H) × 60m(L)

Changwon Plant 2
Changwon Plant 2
Changwon Plant 2
Plant Area Site : 205,204 ㎡
Shop : 76,104 ㎡ (6 Bays)
Production Capa. 3,210Ton (Jack Up Lifter)
38,500Ton/Year (Jack Up Lifter)
Max. Handling Capa. 400Ton
Max. Trans. Capa. 7m(W) × 70m(L) × 400Ton
Max. Plate Bending Size 80(T) × 4 m (W)
Max. Machining Size 4m(D) × 400mm(T)
Furnace Size 6m(W) × 6m(H) × 20m(L)
Shot Blast, Painting 12m(W) × 10m(H) × 30m(L) × 4

Doosan VINA(Vietnam Plant)
Doosan VINA(Vietnam Plant)
Doosan VINA(Vietnam Plant)
Plant Area Site : 167,000 ㎡
Shop : 33,300 ㎡ (4 Bays)
Production Capa. 16,000Tons/Year (2009)
42,000Tons/year
Max. Handling Capa. 200Ton (Future 500Ton)
- In House 150Ton OHC /
- Outdoor 250Ton Hydraulic
   Crane
Max. Trans. Capa. 20m(W) × 100m(L) × 200Ton
Max. Plate Bending Size 71(T)_Cold / 160(T)_Hot × 3m(W)
Max. Forming Capa. 160(T)_Hot
Furnace Size 7.5m(W) × 7.5m(H) × 20m(L)
Shot Blast, Painting 10m(W) x 30m(L) x 12m(H)

Major Facilities(Korea)

Welding Facility
Welding Facility
Single SAW System (Manipulator Type) DC1500A, Max. 6000L
Single SAW System (Portable Type) DC1000A, AC1200A
Tandem SAW System (Manipulator Type) DC1500A + AC1200A,
Max. 6000L
Tandem SAW System (Portable Type) DC1500A + AC1200A
SAW Circle Welder ("D"-Joint Welding) DC1000A, Max Ø 2500mm
Auto Tube Welding System
(Tube to Tube sheet)
DC500A
Auto Inner Bore Welding System
(Tube to Tube sheet)
DC350A
Pipe (in) Overlay Welding System (GTAW) DC500A , 1-1/2" × 700L,
4" × 2500L
Hot Wire GTAW System DC500A
ESW/SAW Strip Band Overlay Welding System (Manipulator Type) DC3000A, Max. 8000L, 30~120mm(Strip)
ESW/SAW Strip Band Overlay Welding System (Portable Type) DC1000A, 30~50mm(Strip)
SMAW Machine (Portable Type) AC500A, DC500A
FCAW Machine (Portable Type) DC650A
GTAW Machine (Portable Type) DC500A, AC/DC500A
GMAW Machine (Portable Type) DC500A
Arc Air Gouging Machine DC1500A
Machining Facility(Plant 1)
Machining Facility(Plant 1)
Kolb CNC Drilling M/C(B.T.A) Th’k580mm × Ø6,000mm × (16~65Ø), 60Tons of Max Weight
CNC Drilling M/C Th’k120mm × Ø1,900mm, 5Tons of Max Weight
Vertical Turing(Rafamet) H3,800mm × Ø3,900mm, 35Tons of Max Weight
Vertical Turing(LVL-6) H1,700mm × Ø3,000mm, 15Tons of Max Weight
Vertical Turing(O.M) H1,200mm × Ø2,500mm, 7Tons of Max Weight
Radial Drilling M/C(2000) H1,500mm × 2,000mm.Length × ~70Øholes
Radial Drilling M/C(2000) H1,500mm × 2,000mm.Length × ~70Øholes
Radial Drilling M/C(1600) H1,500mm × 1,500mm.Length × ~45Ø holes
Horizontal Lather Ø1,000mm × 600mm.Length, 1Tons of Max Weight
Horizontal Lather Ø300mm × 1,000mm.Length , 0.4Tons of Max Weight
C-Seam Taper M/C Ø7,000mm × 4,000mm.Length × Th’k 500,
80Tons of Max Weight
Machining Facility(Plant 2)
Machining Facility(Plant 2)
CNC Drilling M/C(B.T.A) Th’k580mm × Ø3,000mm × (12~52Ø hole), 12Tons of Max Weight
Th’k540mm × Ø2,000mm × (12~52Ø hole), 12Tons of Max Weight
Vertical Turning(LVL-6) H 2,200mm × Ø4,000mm, 12Tons of Max Weight
Milling M/C H 550mm × L 1,200mm × W 500mm, 0.5Tons of Max Weight
Horizontal Lathe Ø450mm × 1,200mm.Length, 0.2Tons of Max Weight
Ø1,300mm × 3,800mm.Length, 1Tons of Max Weight
Ø1,000mm ×3,800mm.Length, 1Tons of Max Weight
CNC Drilling M/C Thk.100mm × Ø2,000mm × (~100Ø hole), 10Tons of Max Weight
Thk.50mm × Ø1,000mm × (~35Ø hole), 1Tons of Max Weight
Radial Drilling M/C(2500) H 2,000mm × 2,500mm.Length × ~120Øholes
Radial Drilling M/C(2000) 1,500mm.Length × 1,000mm.Length × ~80Øholes
Radial Drilling M/C(2500) 2,000mm.Length × 1,500mm.Length × ~100Øholes
Radial Drilling M/C(2000) 1,500mm.Length × 1,000mm.Length × ~80Øholes
CNC Drilling MC(Milling) Th’k 300mm × Ø2600mm × (Ø20~70 hole), 10Tons of Max Weight
Forming & Bending Facility(Plant 1)
Forming & Bending Facility(Plant 1)
10,000 Ton Press T200 × W5,000
3,000 Ton Press T50 × W4,500
500 Ton Press T10 × W1,000
150T Bending Roller T150 × W4,000 × ID1,500
50T Bending Roller T50 × W4,500 × ID1,000
Bending Roller T20 × W1,000 × ID600
T10 × W200 × ID300
Forming & Bending Facility(Plant 2)
Forming & Bending Facility(Plant 2)
1,500 Ton Press T50 × W3,500
Press Brake 20T × W1,000
Profile Bender M/C (Vertical) ~ 4" Pipe B/D
Profile Bending M/C (Vertical) ~ 3" Pipe B/D
Bending Roller 60T × W3,800 × ID1,200
25T × W3,800 × ID1,000
15T × W500 × ID400
Cutting Facility(Plant 1)
Cutting Facility(Plant 1)
Decladding M/C Clad Plate
Plasma Cutting M/C (120A) S/S Plate × ~20T
Plasma Cutting M/C (250A) S/S Plate × ~50T
Plasma Cutting M/C (500A) S/S Plate × ~110T
Plasma Cutting M/C (1000A) S/S Plate × ~125T
Gas Cutting M/C C/S Plate × ~300T
Cutting Facility(Plant 2)
Cutting Facility(Plant 2)
Decladding M/C Clad Plate
Decladding M/C(Robo-Beller) Clad Plate
Plasma Cutting M/C(120A) S/S Steel × ~20T
Plasma Cutting M/C(250A) S/S Steel × ~50T
Plasma Cutting M/C(500A) S/S Steel × ~110T
Gas Cutting M/C C/S Plate × ~300T
C.N.C Cutting M/C C/S Plate × ~120T
Turning Roller & Positioner(Plant 1)
Turning Roller & Positioner(Plant 1)
Turning Roller From 5 to 1,600Ton
Welding Positioner Ø6500mm, 100Ton
Ø6500mm, 100Ton
Ø6000mm, 50Ton
QA/QC Laboratory Facility
QA/QC Laboratory Facility
Universal Testing Machine (Range : 100TON)
Type &
Serial No.
03-1590 (For Tensile amp; Bending Tests)
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KIMS-FT-401) for Calibration Subject
Charpy Impact Tester for Metals (2009-09-23 : 500J)
Type &
Serial No.
DTI-603B / 06-1869 (For Impact Test)
Calibration Method The Instrument is Calibrated by the DK-CQI-I02 (Instruction of Calibration for Charpy Impact Tester for Metal)
That is Traceable to the National Measurement Standards (KOLAS)
Rockwell Hardness Tester
Type &
Serial No.
B523-T / 82476805
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KPM-W-21003) for Calibration Subject
Equotip Hardness Tester
Type &
Serial No.
D-Type / 6110036
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KPM-W-21004) for Calibration Subject
Brinell Hardness Tester
Type &
Serial No.
PB / 4815
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KPM-W-21002) for Calibration Subject
Vickers Hardness Tester
Type &
Serial No.
MVK-G1 / 200583
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KPM-W-21005) for Calibration Subject
Vickers Hardness Tester
Type &
Serial No.
HV-112 / 440089
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KPM-W-21005) for Calibration Subject
Shore Hardness Tester
Type &
Serial No.
A-Type / 613
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KPM-W-21006) for Calibration Subject
Shore Hardness Tester
Type &
Serial No.
D-Type / P4956
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KPM-W-21004) for Calibration Subject
Ultrasonic Thickness Meter
Type &
Serial No.
DM4E / 014HNB (Measuring Range : 0 ~ +200mm)
Calibration Method The Calibration Object has been Calibrated According to the Qamp;Q'S Calibration Method for thickness Gauges, Ultrasonic (QECI-FC236) with Below Standards having Traceability to National Measurement Institute (KRISS)
Surface Roughness Tester
Type &
Serial No.
750661
Calibration Method The Equipment above was Calibrated Comparatively by using Standard Equipments under the Traceability Ensured by National Measurement Standard Body According to lsquo;Standard Calibration Procedure of Surface Roughness Tester (KCT-CI-10506)rsquo; Issued by KCT Co., Ltd.
Ferrite Scope
Type &
Serial No.
B523-T / 82476805
Calibration Method Periodically Checked by Means of Calibrated Specimens Fischerscope Ferrit ndash; Standards : FE-WRC 0.3/80, Ser No : M-0136, Order No : 602 776
Bore Scope (Insertion Tube Length : 1M)
Type &
Serial No.
MSGI-1350 / 10619034
Bore Scope (Insertion Tube Length : 3.5M)
Type &
Serial No.
IPLEX / IV7635
Bore Scope (Insertion Tube Length : 10M)
Type &
Serial No.
ES-8000L / 0612
Coating Thickness Tester
Type &
Serial No.
245 / HD8796-98(Carbon & Stainless)
Calibration Method The Calibration Object has been Calibrated According to the Qamp;Q'S Calibration Method for Thickness Testers, Coation(QECI-LE238) with Below Standards having Traceability to National Measurement Institute (KRISS)
Dead Weight Tester
Type &
Serial No.
(0.49 ~ 49.03) Mpa / 739
Calibration Method The Calibration Object has been Calibrated According to the Qamp;Q'S Calibration Method For Piston Gage, Hydraulic Dead weight (QECI-PS405) with below Standards having Traceability to National Measurement Institute (KRISS)
Dead Weight Tester
Type &
Serial No.
(0.049 ~ 4.903) Mpa / 92-5555
Calibration Method The Calibration Object has been Calibrated According to the Qamp;Q'S Calibration Method For Piston Gage, Hydraulic Dead weight (QECI-PS405) with below Standards having Traceability to National Measurement Institute (KRISS)
Lateral Expansion Gauge
Type &
Serial No.
(0 ~ 12.7) mm / 0.001 mm , 02789
Calibration Method The Calibration Object has been Calibrated According to the Qamp;Q'S Calibration Method for Dial/Digital Gage (QECI-LE609) with below Standards having Traceability to National Measurement Institute (KRISS)
Digital Theodolite
Type &
Serial No.
NE-10L / 120676
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (C-02-002) for Calibration Subject
Ammeter/Voltmeters, AC CLAMP [Digital Clamp]
Type &
Serial No.
TK-2000AD / 314828
Calibration Method The Calibration Object has been Calibrated According to the Qamp;Q'S Calibration Method for Ammeter/Voltmeter, AC Clamp (QECI-EL302) with below Standards having Traceability to National Measurement Institute (KRISS)
Infrared Thermometer [Non-Contact]
Type &
Serial No.
TESTO 845 / 2321844 (Measuring Range : -35 ~ +950℃)
Thermocouple Thermometer [Contact]
Type &
Serial No.
HD2108.1 / 06023239 (Measuring Range : -200 ~ +1,370℃)
Calibration Method The Instrument is Calibrated as per Standard Calibration Procedure (KPM-W-50103-1) for Calibration Subject
NDE Facility
NDE Facility
Radiographic equipment
Cobalt-60 source (3.8mmX5.5mmX5.99mm), manufactured by AEA Technology
Iridium-192 source (3.0mmX1.0mm), manufactured by Hojin
Micro iridium-192 source (1.0mmX1.0mm) manufactured by QSA
X-ray equipment (2.0mmX2.0mm), manufactured by Rigaku Toshiba
Ultrasonic equipment
TOFD / AUT(PSP-4L), manufactured by Force
TOFD / AIS NB-2000MC, manufactured by AIS
Phased array U.T (Omni scan MX), manufactured by Olympus
Phased array U.T (X-32 ASM-9005), manufactured by Harfang Tec
SiteScan130, manufactured by Sonatest
USK-7S, manufactured by Krautkramer
USN-52R, manufactured by Krautkramer
EPOCHⅢ, manufactured by Panametrics
EPOCH4B, manufactured by Panametrics
EPOCH Ⅳ, manufactured by Panametrics
EPOCH XT, manufactured by Panametrics
SS-150L, manufactured by Sonatest
Magnetic & Liquid penetrant equipment
Prod equipment, manufactured by Kyungdo
A.C Yoke, manufactured by Kyungdo & Nawoo
D.C Yoke, manufactured by Kyungdo
Black Light, manufactured by Nawoo & Kyungdo
Positive Material Identification equipment
Portable PMI equipment model XLI, manufactured by Niton
Portable PMI equipment model X-Met 3000(X-ray type), manufactured by Metorex
Portable PMI equipment type spectrotest CCD TXC01(Arc type), manufactured by Spectro

Contact  

Contact us for any inquiries on Doosan E&C’s CPE, and we will reply with the answer.




CPE Business Inquire

T : 82 2 510 3816
F : 82 2 510 5998

Major Facilities(Vietnam)

Welding Facility
Welding Facility
Single SAW System (Manipulator Type) 1,000A, Max. 4000L
Single SAW System (Portable Type) 1,000A
Pipe (in) Overlay Welding System (GTAW) DC500A , 1-1/2" × 700L
SMAW Machine (Portable Type) AC500A, DC500A
FCAW Machine (Portable Type) DC600A
GTAW Machine (Portable Type) 350A
GMAW Machine (Portable Type) 500A
Arc Air Gouging Machine 1500A
Machining Facility
Machining Facility
Turning M/C-Max. 5500/D Max. Ø5,500mm × H2,400mm, 20Ton
CNC Drill M/C-4000x2000 Th'k1,000mm × Ø4,000mm, 40Ton
Radial Drill M/C -1500 Arm. Ø1,500mm × H1,000mm
Radial Drill M/C -2000 Arm. Ø2,000mm × H1,000mm
Portable Drill M/C Drill Hole : Ø4 ~ 20, Tap : ~ M16
Lathe (Middle) Ø400x L3,000mm
Lathe (Middle) Ø700x L3,000mm
Lathe (Large) Ø1,300x L6,000mm
Sawing M/C Ø450mm
Drill Master W5,200mm x L6,500mm x Th'k300mm,
40Tons of Max. Weight
Milling M/C W280 × H450mm × L1,100mm, 250Kg
Forming & Bending Facility
Forming & Bending Facility
Flanging M/C (Spinning M/C) 40T(Used Th'k) × Ø5,000mm(Min 500mm)
Turn-Table 12Ton × Ø5,500mm
Bending Roller (Middle) Bending : 25T × Ø3,000mm
Pre-Bending : 20T × Ø3,000mm(Min 500mm)
Bending Roller (Large) Bending : 71T × Ø3,048mm
Pre-Bending : 57T × Ø3,048mm
Hot Bending : 160T × Ø3,048mm(Min 880mm)
Pipe & Angle bending M/C H-Beam : 190mm × 190mm × 20mm
Pipe : 150A
Press(4,000Ton) Capacity : 4,000Ton
Stroke : W7,500mm × H2,500mm
Press Brake (500Ton) Capacity : 500Ton
Stroke : W2,000mm × H450mm
Cutting Facility
Cutting Facility
CNC cutting M/C Table Size : 3,700W-20,000L
Torch : Plasma, Marking, Cutting, K-Beveling
Capacity : Gas(200mm), Plasma(70mm), Piercing(35mm)
Portable cutting M/C Max. 200T, Portable
Plasma Cutting M/C Max. 80T(400A)
Turning Roller & Positioner etc.
Turning Roller & Positioner etc.
Turning Roller 2-Roll Type, 200Ton
2-Roll Type, 300Ton
2-Roll Type, 100Ton
2-Roll Type, 50Ton
2-Roll Type, 30Ton
2-Roll Type, 10Ton
Hole (Nozzle) Opening M/C Ø600mm
Postioner Ø1,000mm(for Gripping), 1Ton
Ø1,300mm(for Gripping), 5Ton
Expanding M/C (Roll Type) Tube Size : Ø16.0 ~ 48.0mm